Replacing a pump isn't just swapping in the same model. The new one has to suit how deep the water is, how much water the home uses and the pressure tank it works with. Get that wrong and you're back on the phone in a year.
Call (321) 220-9883When replacement makes sense
- Motor tests show it's shorted, open or drawing far too many amps.
- The pump runs but can't build pressure even after the switch, tank and pipe check out.
- The pump is old and repairs are piling up.
- The water level or household needs have changed and the pump no longer fits.
What the job involves
- Confirm the pump is the problem, with readings.
- Choose the right type and size: submersible for deeper wells, jet pump for shallow ones.
- Pull the old pump if it's in the well, and inspect the pipe, wire and check valves while it's out.
- Install, then test flow, pressure and amp draw.
- Check the tank and switch, because a bad tank shortens a new pump's life.
How long it takes
Most replacements take one visit. A deep well, extra pipe or wire, or a special-order pump can stretch it. You'll know before work starts.
Help the new pump last
- Keep the tank's air charge right so the pump doesn't short cycle.
- Add surge protection on the pump circuit.
- Ask about a sediment filter if you get sand.
Common questions
How long should a new well pump last?
Many last 8 to 15 years. Short cycling, sand and lightning are what usually cut that short.
Do I need a new tank too?
Not always, but a waterlogged tank will wear out a new pump, so it should be checked during the job.
Can it be done the same day?
Often, if the right pump is on the truck. Deep wells or unusual setups can take longer.